Hempstead / Port Washington

Heat pump installation in Port Washington, NY - up to $7,000 rebate

Port Washington, 9 miles out

Port Washington is about 9 miles from the Census center point for Hempstead in a straight line and covers 4.201 square miles of land (Census 2024 Gazetteer internal points and land area, https://www2.census.gov/geo/docs/maps-data/data/gazetteer/2024_Gazetteer/, checked 2026-10-19).

Port Washington has 18,004 residents (give or take 1,383) (ACS 2020-2024 5-year, table B01003, https://data.census.gov/table/ACSDT5Y2024.B01003?g=160XX00US3659520, checked 2026-10-19), about 4,286 people per square mile.

The quote form takes a ZIP code; for Port Washington that is 11050 (Census 2020 ZCTA to county subdivision and ZCTA to place relationship files, ZIP areas at least 20% inside the town, https://www2.census.gov/geo/docs/maps-data/data/rel2020/zcta520/tab20_zcta520_cousub20_natl.txt and https://www2.census.gov/geo/docs/maps-data/data/rel2020/zcta520/tab20_zcta520_place20_natl.txt, checked 2026-10-19).

4,286 people per square mile puts Port Washington in suburban density, where the outdoor unit usually sits in a side yard and the noise is not an issue for neighbors.

What heats Port Washington

Of the 6,115 occupied homes in Port Washington, 64% heat with natural gas, 20% with heating oil, 12% with electricity and 2% with propane (ACS 2020-2024 5-year, table B25040, https://data.census.gov/table/ACSDT5Y2024.B25040?g=160XX00US3659520, checked 2026-10-19).

Port Washington has 6 points less oil heat than Nassau County as a whole, where 26% of homes burn oil, and 5 points more electric heat than the county's 7% (ACS 2020-2024 5-year, table B25040, https://data.census.gov/table/ACSDT5Y2024.B25040?g=050XX00US36059, checked 2026-10-19).

Gas leads in Port Washington at 64%, but 22% of homes still burn delivered oil or propane, and those 1,345 or so homes are where a heat pump pays back fastest.

Age of the housing

The median Port Washington home was built in 1953 (ACS 2020-2024 5-year, table B25035, https://data.census.gov/table/ACSDT5Y2024.B25035?g=160XX00US3659520, checked 2026-10-19) and the median home has 6.7 rooms (ACS 2020-2024 5-year, table B25018, https://data.census.gov/table/ACSDT5Y2024.B25018?g=160XX00US3659520, checked 2026-10-19).

Port Washington has 6,486 housing units, 33% built before 1940 and 82% before 1980, with 11% built in 2000 or later (ACS 2020-2024 5-year, table B25034, https://data.census.gov/table/ACSDT5Y2024.B25034?g=160XX00US3659520, checked 2026-10-19).

Port Washington has 14 points more pre-1940 homes than Nassau County as a whole (19%) and 4 points more homes built after 2000 than the county's 7% (ACS 2020-2024 5-year, table B25034, https://data.census.gov/table/ACSDT5Y2024.B25034?g=050XX00US36059, checked 2026-10-19). An older stock means more insulation upgrades before the heat pump goes in.

33% of Port Washington homes were built before 1940 and 82% before 1980 (ACS 2020-2024 5-year, table B25034, https://data.census.gov/table/ACSDT5Y2024.B25034?g=160XX00US3659520, checked 2026-10-19), so insulation is the first sizing question: an older home leaks more heat per square foot, and the installer runs a room-by-room heat-loss calculation to size the system for what the walls and windows actually hold in, not just the floor plan.

House type

72% of Port Washington homes are single-family detached, 8% are in two- to four-unit buildings and 17% are in buildings of five or more units (ACS 2020-2024 5-year, table B25024, https://data.census.gov/table/ACSDT5Y2024.B25024?g=160XX00US3659520, checked 2026-10-19).

With 72% detached houses and 8% in small multi-family buildings, a Port Washington quote is usually one or two outdoor units with ducted or ductless heads sized room by room. With 23% of Port Washington homes rented (ACS 2020-2024 5-year, table B25003, https://data.census.gov/table/ACSDT5Y2024.B25003?g=160XX00US3659520, checked 2026-10-19), the landlord signs the quote in many of them.

Utility and rebate

No electric utility is on file for Port Washington on this door yet, so this page does not name one; the name on the bill decides which rebate path applies.

NYS Clean Heat (Con Edison), run by Con Edison, is a live program for New York addresses and lists a standard figure of $7,000 (registry row 5 verified 2026-10-16, https://www.coned.com/en/save-money/rebates-incentives-tax-credits/rebates-incentives-tax-credits-for-residential-customers/electric-heating-and-cooling-technology-for-renters-homeowners/save-on-a-central-air-source-heat-pump, checked 2026-10-16); confirm eligibility for the Port Washington address before counting it. With 12% of Port Washington homes already on electric heat and 86% on gas, oil or propane, the row that applies depends on the name on the electric bill and the fuel coming out.

Median household income in Port Washington is $170,127 (ACS 2020-2024 5-year, table B19013, https://data.census.gov/table/ACSDT5Y2024.B19013?g=160XX00US3659520, checked 2026-10-19); many state and utility heat pump rebate programs set higher incentive tiers for income-qualifying households, so the household income on the application, not the town median, decides which level applies.

Design temperature

Heating design temperature: 9F. Source: ENERGY STAR Design Temperature Limit Reference Guide (2019 Edition), Nassau County row, 99% heating, PDF pages 84 to 86 of 141 (Revised 11/11/2020), https://www.energystar.gov/sites/default/files/Design%20Temperature%20Limit%20Reference%20Guide%20(2019%20Ed)%20-%20ENERGY%20STAR%20Single-Family%20New%20Homes_Rev11.pdf, fetched 2026-10-19, 99%.

That 9F figure is the Nassau County cold-day number a Port Washington heat pump is sized against, so ask the installer to show the system's heating output at 9F, not at the milder rating-label temperature.

Next step

Ask whether the quote is whole-home or partial-home, because with 64% of Port Washington on gas and 12% already electric the two paths carry different rebate figures and different sizing.

Ask for the heat-loss calculation room by room; a Port Washington house from before 1940 (33% of the 6,486 units) rarely matches a square-footage rule of thumb.

The form on this page is the follow-up for Port Washington. The public number is the number the contractor quotes from.

No local contractor is named on this door for Port Washington yet. A request from this page goes to the first licensed shop that takes the door.

Where should the follow-up go?

We will follow up by email. No calls.

No spam, no sold information. One follow-up about exactly this request.